CLI Guide

Table 17. Details of fcp attribute (continued)
• To view the status of force change password feature:
racadm fcp getstatus
fcp
Table 18. Details of fcp attribute
Description
Prompts you to change the password.
Synopsis
racadm fcp <enable/getstatus>
Input
• enable: Enables the force password change feature
• getstatus: Displays the status of force change password feature
NOTE: You must have the RAC_ADMIN privileges to run the fcp enable command.
Legal Values For the fcp get status, the values are:
• 0 : FCP Feature has been disabled on CMC.
• 1 : FCP Feature has been enabled on CMC.
Example
• To enable force change password feature:
racadm fcp enable
• To view the status of force change password feature:
racadm fcp getstatus
feature
Table 19. Details of feature
Description Displays all active chassis features. The information displayed includes feature name, date activated,
and the serial number of the SD card used to activate the feature.
Dell Feature Cards may contain more than one feature
NOTE: To use this subcommand to deactivate the FlexAddress or ExtendedStorage,
you must have the Chassis Configuration Administrator privilege. A user with login
privileges can view status only.
NOTE: To deactivate FlexAddress features, the chassis must be turned off.
Synopsis • racadm feature -s
• racadm feature -d -c <featurename>
• racadm feature -r -c ExtendedStorage
Input • -s — Displays the status of active features.
• -d — Deactivates the feature specified in -c option.
NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating
one of them results in deactivation of the other feature also. However,
ExtendedStorage is not affected by the deactivation of FlexAddress or
FlexAddresPlus.
RACADM Subcommand Details 29