CLI Guide

cfgCurrentIPv6DNSServer1
Table 317. Details of cfgCurrentIPv6DNSServer1
Description Displays the IPv6 address for DNS server 1.
cfgCurrentIPv6DNSServer2
Table 318. Details of cfgCurrentIPv6DNSServer2
Description Displays the IPv6 address for DNS server 2.
cfgNetTuning
This group enables users to configure the advanced network interface parameters for the RAC NIC or CMC. When configured, the
updated settings may take up to a minute to become active.
The following sections provide information about the objects in the cfgNetTuning group.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modification of the properties in
this group can result in your RAC NIC become inoperable.
cfgNetTuningNicSpeed
Table 319. Details of cfgNetTuningNicSpeed
Description Specifies the speed for the CMC NIC. This property is used only if cfgNetTuningNicAutoNeg is set
to 0.
Legal Values 10, 100, or 1000
Default 100
cfgNetTuningNicAutoneg (Read/Write)
Table 320. Details of cfgNetTuningNicAutoneg
Description Enables autonegotiation of physical link speed and duplex. If enabled, autonegotiation takes priority
over other values set in this group.
Legal Values • 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default 1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
152
CMC Property Database Group and Object Descriptions