CLI Guide

Examples
racadm getconfig -g cfgAlerting -o cfgAlertingSourceEmailName
racadm config -g cfgAlerting -o cfgAlertingSourceEmailName [e-mail]
Object value modified successfully.
To use this object property, you must have Chassis Configuration Administrator and Test Alert User privileges.
cfgIPv6LanNetworking
This group is used to configure the IPv6 over LAN networking capabilities.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE: To apply this setting to iDRAC, use the -m option.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read or Write)
Table 292. Details of cfgIPv6Enable
Description Enables or disables CMC IPv6 stack.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
cfgIPv6AutoConfig (Read/Write)
Table 293. Details of cfgIPv6AutoConfig
Description Enables or disables the IPv6 Auto Configuration option.
NOTE: If this value is set to 0, the CMC disables auto configuration and statically
assigns IPv6 addresses. If this value is set to 1, the CMC obtains address and route
information using stateless auto configuration and DHCPv6.
NOTE: The CMC uses its MAC address for its DUID (DUID-LL) when communicating
with a DHCPv6 server.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default
1
146 CMC Property Database Group and Object Descriptions