CLI Guide

Table 231. Details of cfgADDcSRVLookupDomainName (continued)
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupDomainName (Read/Write)
Table 232. Details of cfgADDcSRVLookupDomainName
Description This is the Active Directory Domain to use when cfgAddcSrvLookupbyUserDomain is set to 0.
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupEnable (Read/Write)
Table 233. Details of cfgADDcSRVLookupEnable
Description Configures CMC to use pre‑configured domain controllers or to use DNS to find the domain
controller. If using pre‑configured domain controllers, then the domain controllers to use are specified
under cfgAdDomainController1, cfgAdDomainController2, and cfgAdDomainController3. CMC
does not fail over to the specified domain controllers when DNS lookup fails or none of the servers
returned by the DNS lookup works.
Legal Values • 1 (TRUE)—use DNS to look up domain controllers
• 0 (FALSE)—use pre‑configured domain controllers
Default 0
cfgADSpecifyServerEnable
Table 234. Details of cfgADSpecifyServerEnable
Description Allows you to enable or disable and specify an LDAP server or a global catalog server. Use
cfgADDomainController or cfgADGlobalCatalog to specify the IP address.
Legal Values • 1 (enabled)
• 0 (disabled)
Default 0
cfgLDAP
This group allows you to configure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgLDAP group.
CMC Property Database Group and Object Descriptions
131