CLI Guide

cfgSerialConsoleColumns
Table 154. Details of cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal window command line connected to the serial port.
You must log out, then log in again for the changes to take effect.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with the line wrap mode ON, if a
terminal emulator is used.
Legal Values 0–256
Default 0 (equivalent to 80)
cfgSerialHistorySize (Read/Write)
Table 155. Details of cfgSerialHistorySize
Description Specifies the maximum size of the serial history buffer.
Legal Values 0 – 8192
Default 8192
cfgSerialSshEnable (Read/Write)
Table 156. Details of cfgSerialSshEnable
Description Enables or disables the secure shell (SSH) interface on CMC.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Legal Values 1
cfgSerialTelnetEnable (Read/Write)
Table 157. Details of cfgSerialTelnetEnable
Description Enables or disables the Telnet console interface on CMC.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of CMC. One instance of the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2, and the Dell enterprise-specific MIB.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
CMC Property Database Group and Object Descriptions
113