CLI Guide

cfgNicVLanPriority - Read or Write
Table 121. Details of cfgNicVLanPriority
Description Specifies the VLAN Priority for the network VLAN configuration in CMC. This property is only valid if
cfgNicVLanEnable is set to 1 (enabled).
Legal Values 0 – 7
Default 0
Example
racadm config -g cfgLanNetworking -o
cfgNicVLanPriority 7
cfgDNSDomainNameFromDHCP - Read or Write
Table 122. Details of cfgDNSDomainNameFromDHCP
Description Specifies that the DNS domain name should be assigned from the network DHCP server.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgCurrentIPv6Enabled and cfgIPv6AutoConfig are set to 1
(true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1 (true):
• cfgNicIPv4Enable
• cfgNicUseDhcp
• cfgCurrentIPv6Enabled
• cfgIPv6AutoConfig
• cfgDNSDomainNameFromDHCP
• cfgDNSDomainName (Read/Write)
The network administrator must make sure that these DHCP servers are configured to provide the same DNS domain name to the CMC,
otherwise the domain name becomes unpredictable.
cfgDNSDomainName - Read or Write
Table 123. Details of cfgDNSDomainName
Description In the DNS domain name, parameter is only valid if cfgDNSDomainNameFromDHCP is set to 0
(FALSE).
Legal Values A string of up to 254 ASCII characters. At least one of the characters must be alphabetic.
Characters are restricted to alphanumeric, '-', and '.'.
NOTE: Microsoft Active Directory only supports Fully Qualified Domain Names (FQDN)
of 64 bytes or fewer.
Default
<blank>
102 CMC Property Database Group and Object Descriptions