Users Guide

Table 49. Hard Disk Drive Status
Item Description
Hard Disk Drive: <number> Displays the Hard disk drive name in the format Hard Disk Drive <n>, where 'n' is the
hard drive number. Example: Hard Disk Drive 1, Hard Disk Drive 2, and so on.
Error Messages
If there are no errors, No Errors is displayed. Else, error messages are listed where
critical ones are first listed, and then the warning-related.
Power Status Spun-Up, Transition, or Spun-Down — Indicates the power status of a hard disk drive
Manufacturer Manufacturer name
Capacity Available Storage capacity of the Hard Disk Drive in gigabytes (GB)
Firmware version Firmware version of the Hard Disk Drive
State Offline, Online, or Standby — Indicates the power status of the hard disk drive.
Table 50. Server Status
Item Description
Name/Location Example: Server 1, Server 2, and so on.
No Errors If there are no errors, No Errors is displayed. Else, error messages are listed where
critical ones are first listed, and then the warning-related. For more information, see
"LCD Error Messages".
Slot Name Chassis slot name. For example, SLOT-01.
NOTE: You can set this table through the CMC CLI or CMC Web interface.
Name Name of the server, which the user can set through Dell OpenManage. The name is
displayed only if iDRAC has finished booting, and the server supports this feature, else
iDRAC booting messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware Version Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is no iDRAC version 1.10.
IP4 <enabled, disabled> Displays the current IPv4 enabled state.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled.
IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays current IPv6-enabled state.
IP6 Local Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
IP6 Global Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
FlexAddress enabled on Fabrics Only displays if the feature is installed. Lists the fabrics enabled for this server (that is,
A, B, C).
The information in the table is dynamically updated. If the server does not support this feature, then the following information does
not appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Effect.
206