Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.20 for Dell PowerEdge VRTX

141

142

143

144

145

146

147

148

149

150

9. From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition

status.

For information about the fields, see the Online Help.

Viewing Advanced WWN/MAC Address Information Using Web

Interface

To view WWN/MAC Address Information for each server slot or all servers in a chassis, in the advanced mode:

1. Click Server Overview → Properties → WWN/MAC

The WWN/MAC Summary page displays the WWN/MAC Address Information.

2. From the View drop-down menu, select Advanced, to view the WWN/MAC Addresses attributes in detailed view.

In the WWN/MAC Addresses table displays Server Slot, Fabric, Protocol, WWN/MAC addresses, Partition Status, and the

MAC address assignment type — Server assigned, FlexAddress, or I/O Identity MAC. A black check mark indicates the active

address type, either server-assigned, chassis-assigned, or remote assigned. MAC.

3. In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.

4. Click the against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specific slot or all the

slots in the WWN/MAC Addresses table.

5. From the Server Slot drop-down menu, select All Servers or a specific Slot to view the WWN/MAC Addresses attributes for

all servers or servers in specific slots only respectively.

6. From the Fabric drop-down menu, select one of the fabric types to view details for all or specific type of management or I/O

fabric associated with the servers.

7. From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACS or the

MACs associated with the selected protocol.

8. In the WWN/MAC Addresses field, enter the MAC address to view only the slots associated with the specific MAC address.

9. From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition

status.

If a particular partition is disabled, the status is displayed as Disabled and the row displaying the partition is greyed out.

For information about the fields, see the Online Help.

Viewing WWN/MAC Address Information Using RACADM

To view WWN/MAC address information for all servers or specific servers using RACADM, use the getflexaddr and

getmacaddress subcommands.

To display Flexaddress for the entire chassis, use the following RACADM command:

racadm getflexaddr

To display Flexaddress status for a particular slot, use the following RACADM command:

racadm getflexaddr [-i <slot#>]

where <slot #> is a value from 1 to 4.

To display the NDC or LOM MAC address, use the following RACADM command:

racadm getmacaddress

To display the MAC address for chassis, use the following RACADM command:

racadm getmacaddress -m chassis

To display the iSCSI MAC addresses for all servers, use the following RACADM command:

racadm getmacaddress -t iscsi

To display the iSCSI MAC for a specific server, use the following RACADM command:

racadm getmacaddress [-m <module> [-x]] [-t iscsi]

150