Release Notes

 Updating glibc to version 2.23 to address new security vulnerabilities.
 TLS 1.2 and TLS 1.1 by default.
 User configuration option to enable TLS 1.0 using RACADM.
 SNMPv3 configuration only in RACADM.
 Querying the health status of the chassis components using WSMan.
 Initiating Quick Deploy of blade through RACADM.
 Configuring CMC using WSMan for the following features:
o Host Name of Chassis
o IP Configuration
o DNS
o DNS Registration
o NTP
o Change Default Password
 Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.
 Populating CMC Device name correctly in the inventory.
Release 2.12
 Quick link to the Dell Tech Center page from the CMC web GUI.
Release 2.10
 Support for PowerEdge M830 Blade server for PowerEdge VRTX Chassis.
 Support for 1100W PSU.
 Pre-enablement support for Shared External Storage expansion (JBOD support).
 Firmware and driver refresh of COMMs cards on Dell's 13th generation PowerEdge servers.
 Support for Emulex Fibre Channel (FC) 8 HBA adapters.
 Capture and replicate chassis configurations through XML based on the Chassis configuration profile.
 Support for blinking server identification LED using Quick Link.
 Backup or restore through XML based on the chassis configuration profile.
 Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to enable a quick
restore of workload to a spare server.
Fixes
 Fixed an issue causing flash Media Status showing as "Version mismatch" during changeover or upgrade of
the CMC.
 Fixed an issue causing the Server Profile page to hang when a profile is applied to multiple servers.
 Fixed an issue limiting the speed of bNDC ports on some blades to 1 Gb after initial chassis turn on or blade
insertion.
Release 2.12
 Fixed an issue causing failure of RAID10 Virtual Disc (VD) with 8, 12 or 16 drives in creating full VD when
the span count 2 is selected.