Reference Guide
• Unassign a Virtual Adapter:
racadm setpciecfg unassign -c RAID.ChassisIntegrated.1-1-3
• Enable ride-through mode
racadm setpciecfg ridethru -e
IOV000: Successfully completed the operation.
• Disable ride-through mode
racadm setpciecfg ridethru -d
IOV000: Successfully completed the operation.
• Set the ride-through time out value in seconds (0, 60–1800; 0 = innite)
racadm setpciecfg ridethru -t 300
IOV000: Successfully completed the operation.
setractime
Description Sets the date and time on the CMC.
To use this subcommand, you must have the Administrator
privilege.
Synopsis
• racadm setractime -d <yyyymmddhhmmss.mmmmmmso>
• racadm setractime -l YYYYMMDDhhmmss
• racadm setractime -z {?|timezone|timezone-prex*}
Input
• -d — Sets the time to value in the string:
— yyyy is the year
— mm is the month
— dd is the day
— hh is the hour
— mm is the minutes
— ss is the seconds
— mmmmmm is the number of microseconds
— s is a + (plus) sign or a - (minus) sign, which indicates the
sign of the oset.
— o is the oset in minutes
NOTE: 'O' is the oset in minutes from GMT and must
be in 15-minute increments. The timezone is represented
as an oset from GMT, and the clock does not
automatically adjust to daylight savings time (for the '-d'
option).
• -z <zone> - Sets the time zone by name or index, or lists
possible time zones. For example, PST8PDT (Western
United States), 294 (Seoul), 344 (Sydney). <zone> may be:
— <?> lists the major timezone names/prexes.
— <timezone> is the case-sensitive name of your timezone
or the index listed by '-z timezone-prex*'.
94