Reference Guide

Server is already powered OFF.
• Turn o the server from iDRAC when Power is already o on that server.
racadm serveraction powerdown
Server is already powered OFF
• Get Power Status of server 2 on CMC
racadm serveraction -m server-2 powerstatus
ON
• Get Power Status on iDRAC
racadm serveraction powerstatus
Server Power Status: ON
• Reseat server 2 on CMC
$ racadm serveraction -m server-2 reseat -f
Server power operation successful
• Explanation of Support
iDRAC needs to support graceful shutdown
The support of address individual blades is expected on the CMC
set
Description
Import saved CMC conguration or CMC Event Filter conguration from a le.
NOTE: If CMC is not in the network, you cannot import the chassis conguration prole
from a remote network share with proxy using the set command. But, you can import the
chassis conguration prole from the local management station.
Synopsis
racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f
<filename>
racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f
<filename> -t xml
racadm set -f <filename> -t xml -u <username> -p <password> -l <CIFS
share>
racadm set -f <filename> -t xml -l <NFS share>
Input
• -f: import CMC conguration or CMC event lter from a le.
• -u: username of the remote share from where the le must be imported.
• -p: password for the remote share from where the le must be imported.
• -l: network share location from where the le must be imported.
• -t: specify the le type to be imported. The valid value is “xml”. This option is case-sensitive.
Example
• Congure event lter congurations from a conguration le using remote racadm
racadm -r 192.168.0.120 -u <username> -p <password> set -f file.txt
• Congure a CMC from an XML conguration le on a local share using remote racadm
racadm -r 192.168.0.120 -u <username> -p <password> set -f
myfile.xml -t xml
• Congure a CMC from an XML conguration le on a remote CIFS share
racadm set -f myfile.xml -t xml -u myuser -p mypass -l //
192.168.0.0/myshare
89