Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.20 for Dell PowerEdge VRTX

To use this subcommand for CMC, you must have the

Administrator privilege.

Synopsis

racadm racdump

Input Racdump includes the following subsystems and aggregates the

following RACADM commands:

• General System/RAC information - getsysinfo

• Session information - getssinfo

• Sensor information - getsensorinfo

• Switches information (IO Module) - getioinfo

• Mezzanine card information (Daughter card) - getdcinfo

• All modules information - getmodinfo

• Power budget information - getpbinfo

• KVM information - getkvminfo

• NIC information (CMC module) - getniccfg

• Redundancy information - getredundancymode

• Trace log information - gettracelog

• RAC event log - getraclog

• System event log - getsel

Output The following information is displayed when the

racdumpsubcommand is processed:

• General system/RAC information

• Coredump

• Session information

• Process information

• Firmware build information

Example

racadm racdump

===============================================================================

General System/RAC Information

===============================================================================

CMC Information:

CMC Date/Time = Wed, 28 Nov 2007 11:55:49 PM

CMC Version = X08

Last Firmware Update = Wed Nov 21 21:37:56 2007

Hardware Version = 2

Current IP Address = 192.168.155.10

Current IP Gateway = 192.168.155.1

Current IP Netmask = 255.255.255.128

DHCP Enabled = 1

MAC Address = 00:55:AB:39:10:0F

Current DNS Server 1 = 0.0.0.0

Current DNS Server 2 = 0.0.0.0

DNS Servers from DHCP = 0

DNS CMC Name = cmc-servicetag

Current DNS Domain =

Chassis Information:

System Model = PowerEdge VRTX

System AssetTag = 00000

Service Tag =