Reference Guide

<Name> <Type> <Presence> <Active WWN/MAC> <Partition
Status>
<Assignment
Type>
Server-1-A IDRAC-
Controller
Present 18:A9:9B:FD:C4:DF N/A Factory
Gigabit
Ethernet
Present 00:0A:00:0A:00:00 Unknown IO-Identity
Server-3-A Gigabit
Ethernet
Present 84:8F:69:FC:E8:F1 Unknown Factory
Server-4-A 10 GbE KR/3 Present F8:DB:88:3D:A2:7A Unknown FlexAddress
FCoE-WWN Present 20:01:F8:DB:
88:3D:A2:7A
Unknown FlexAddress
getmodinfo
Table 16. getmodinfo
Description
Displays conguration and status information for all modules or a specied module (server, switch, CMC, fan
unit, blower, power supply unit, chassis, DVD, main-board, IO cable, and FPC cable) in the chassis.
To use this subcommand, you must have CMC Login User privilege.
NOTE: The service tag eld is blank for modules that do not have service tags.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
• -m <module> — Species the module for which the conguration and status information is required. The
default command (no options) displays information about all the major components in the chassis.
<module> can be one of the following values:
– server-n, where n = 1 to 4
– switch-n, where n = 1
– CMC-n, where n = 1 or 2
– fan-n, where n = 1 to 6
– blower-n, where n = 1 to 4
– ps-n, where n = 1 to 4
– chassis
– dvd
– main-board
– io-cable
– fpc-cable
– storage
• -A — Does not display the headers and labels in the output.
Example
• racadm getmodinfo -m switch-1
<module> <presence> <pwrState> <health>
<svcTag> <nodeId>
Switch-1 Present
ON OK N/
A N/A
• racadm getmodinfo
45