Reference Guide

switch-1 ON R1-PT

VRTX 1Gb

Master

Pass-

through

N/A Gigabit

Ethernet

Present OK

getled

Description Displays the LED settings on a module: blinking, not blinking, or

unknown (for empty slots).

To use this subcommand, you must have the Login User

privilege.

Synopsis

racadm getled -m <module>

Input CMC only options:

-m <module> — Species the module whose LED settings you

want to view.

<module> can be one of the following:

• server-n where n=1–4

• switch-n where n=1

• chassis

• cmc-active

Example For CMC:

• racadm getled -m server-10

<module> <LED state> server-10 Blinking

• racadm getled -m chassis

<module> <LED state> server-10 Not blinking

• racadm getled -m server-1

<module> <LED state> server-1 ON

• racadm getled -m server-9

<module> <LED state> server-9 Extension(1)

getmacaddress

Description

Displays the MAC/WWN addresses and fabric ID decoder for all modules or for a specied module.

The decoder values indicate the protocols of the network cards:

• 0— Unsupported

• 1— ISCSI

• 2— FCoE-FIP

• 3— iSCSI/FCoE-FIP

To use this subcommand, you must have the CMC Login User privilege.

Synopsis

• racadm getmacaddress

• racadm getmacaddress -m chassis

• racadm getmacaddress -m switch-<n>