Reference Guide

NOTE: To deactivate FlexAddress features, the chassis must be turned o.

Synopsis

• racadm feature -s

• racadm feature -d -c <featurename>

• racadm feature -r -c ExtendedStorage

Input

• -s — Displays the status of active features.

• -d — Deactivates the feature specified in -c option.

NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating one of them

results in deactivation of the other feature also. However, ExtendedStorage is not aected by the

deactivation of FlexAddress or FlexAddresPlus.

• -r — Repair damaged/unformatted ExtendedStorage media.

NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.

CAUTION: Using the -r switch reformats the SD media in the active CMC cardslot. Any existing

ExtendedStorage data will be lost.

• -c — <featurename> must be one of the following:

• flexaddress (with -d)

• flexaddressplus (with -d) ExtendedStorage (with -d or -r)

featurecard

Description

Veries proper SD card installation and displays the SD card

status.

To use this subcommand, you must have the Chassis

Conguration Administrator privilege.

Synopsis

racadm featurecard -s

Input -s — Lists active SD card features and SD card status.

Output

An example of output is given here.

racadm featurecard -s

Active CMC: The feature card inserted is

valid, serial number =

CN0H871T137401112222A00 The feature card

contains the following feature(s):

FlexAddress: bound

FlexAddressPlus: bound

ExtendedStorage: bound

Standby CMC: The feature card contains the

following feature(s):

FlexAddress: not bound

FlexAddressPlus: not bound

ExtendedStorage: bound