Reference Guide

• Display eventlter congurations for a specic severity and subcategory. For example, a

severity of warning in the subcategory licensing under audit category:

racadm eventfilters get -c cmc.alert.audit.lic.warning

• Clear all available alert settings:

racadm eventfilters set -c cmc.alert.all -n none

• Congure using severity as a parameter. For example, all informational events in storage

category are assigned powero as action, and email and snmp as notications:

racadm eventfilters set -c cmc.alert.storage.info -n email,snmp

• Congure using subcategory as a parameter. For example, all congurations under the licensing

subcategory in the audit category are assigned powero as action and all notications are

enabled:

racadm eventfilters set -c cmc.alert.audit.lic -n all

• Congure using subcategory and severity as parameters. For example, all Information events

under the licensing subcategory in the audit category are assigned powero as action and all

notications are disabled:

racadm eventfilters set -c cmc.alert.audit.lic.info -n none

fanoset

Description

Congures the internal fans to run at a higher speed than the normal speed.

To use this subcommand, you must have the Chassis Conguration Administrator privilege.

Synopsis

racadm fanoffset [-s <off|low|medium|high>

Valid category values are:

• o

• low

• medium

• high

Input s — Sets the fan speed.

Example

• Disable the fanoset feature.

racadm fanoffset -s off

• Increases fan speed by 20% of fan’s maximum speed. Minimum speed for fan is 35% of the

maximum.

racadm fanoffset -s low

• Increases fan speed by 50% of fan’s maximum speed. Minimum speed for fan is 65% of the

maximum.

racadm fanoffset -s medium

• Sets fans to run at 100% of fan’s maximum speed.

racadm fanoffset -s high

feature

Description

Displays all active chassis features. The information displayed includes feature name, date activated, and the

serial number of the SD card used to activate the feature.

Dell Feature Cards may contain more than one feature.

NOTE: To use this subcommand to deactivate FlexAddress or ExtendedStorage, you must have the

Chassis Conguration Administrator privilege. A user with login privileges can view status only.