Reference Guide

-c : show chassis information
-A : do not show headers or labels
-4 : show CMC IPv4 information
-6 : show CMC IPv6 information
help and help <subcommand>
Table 5. Help commands
Description Lists all the subcommands available for use with RACADM and provides a short description for each. You may
also type a subcommand after help.
Synopsis
• racadm help
• racadm help <subcommand>
Input None
Output
• The help command displays a complete list of subcommands.
Example
racadm help getsysinfo
chassislog
Table 6. chassislog
Description
Allows you to view, export, or clear the chassis log history.
To clear a chassis log, you must have the Clear Logs Administrator privilege.
NOTE: It is recommended that you use Firmware RACADM to run this subcommand.
Synopsis
racadm chassislog view [-i]
racadm chassislog view [-c <category> [-s <severity>] [-b
<subcategory>]
[-q <
sequence no.>] [-n <number of records>] [-r <start timestamp>]
[-e <end timestamp>]
Input
• -i — Displays the number of records present in the active log. You cannot use this option with
any other option.
• -c — The log type to lter the records. Provide multiple categories using a "," as the delimiter.
The value is case-insensitive. Valid Category values:
– All
– System
– Storage
– Updates
– Audit
– Cong
• -q - The sequence number from which the records must be displayed.
• -n - Species the n Number of records to be displayed.
• -r - Displays events that have occurred after this time. The time format is yyyy-mm-dd
HH:MM:SS. The time stamp must be provided within double quotes.
• -e - Displays events that have occurred before this time. The time format is yyyy-mm-dd
HH:MM:SS. The time stamp must be provided within double quotes.
• -f <lename> - Species the le location and name where the chassis log is exported.
• -a <name> - Species the FTP Server IP address or FQDN, user name, and password.
• -d <path> - Species the path to the le on the FTP server.
20