Reference Guide

cfgChassisServerBasedPowerMgmtMode
Description Indicates the server-based power management mode of a chassis.
Legal Values
• 0 (disabled)
• 1 (enabled)
Default 0 (disabled)
cfgChassisPowerCapBTU (Read/Write)
Description Indicates the maximum power consumption limit (in BTU/hr) for
the entire chassis. The command generates an error if server
throttling is necessary to achieve the power goal based on the
value for this setting.
Legal Values 9264 - 56931 BTU/hr
Default 43221 BTU/hr
cfgChassisACPowerRecoveryDisable
Description
If AC power recovery is disabled, the chassis is powered o after power outage is restored.
Legal Values
• 0 — Enable
• 1 — Disable
Default
0
cfgKVMInfo
This group is used to view the mapping information for the KVM.
Use this object with the cong or getcong subcommands.
To use this object property, you must have Chassis Conguration Administrator privilege.
cfgKvmMapping Read or Write
Description
Maps the slots to the KVM.
Legal Values 1, 2, 3, and 4 are the slot numbers that are specied.
Default 1
cfgKvmSlot<num>Enable Read or Write
Description
Enable the slots (1 to 4) to access using KVM:
• cfgKvmSlot1Enable
• cfgKvmSlot2Enable
• cfgKvmSlot3Enable
152