Reference Guide

cfgSerialConsoleIdleTimeout (Read/Write)
Description The maximum number of seconds to wait before an idle serial
session is disconnected.
Legal Values
• 0 = No timeout
• 60 – 10800
Default
1800
cfgSerialConsoleNoAuth (Read/Write)
Description Enables or disables the RAC or CMC serial console login
authentication.
Legal Values
• 0 (enables serial login authentication)
• 1 (disables serial login authentication)
Default 0
cfgSerialConsoleCommand (Read/Write)
Description
Species a serial command that is executed after a user logs
into the serial console interface.
Legal Values
A string representing a valid serial command. For example,
connect server-1.
Default <blank>
cfgSerialConsoleColumns
Description
Species the number of columns in the terminal window
command line connected to the serial port. You must log out,
then log in again for the changes to take eect.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be congured with
the line wrap mode ON, if a terminal emulator is used.
Legal Values 0–256
Default 0 (equivalent to 80)
cfgSerialHistorySize (Read/Write)
Description
Species the maximum size of the serial history buer.
Legal Values 0 – 8192
Default 8192
120