Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.20 for Dell PowerEdge VRTX
101102103104105106107108109110
cfgDNSServersFromDHCP (Read/Write)
Description Species if the DNS server IPv4 addresses should be assigned
from the DHCP server on the network.
For CMC, this property is used only if cfgNicUseDhcp is set to 1
(true).
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgDNSServer1 (Read/Write)
Description Species the IPv4 address for DNS server 1. This property is
only valid if cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgDNSServer2 (Read/Write)
Description
Retrieves the IPv4 address for DNS server 2. This parameter is
only valid if cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgNicEnable (Read/Write)
Description
Enables or disables CMC network interface controller. If the NIC
is disabled, the remote network interfaces to CMC are no longer
accessible and CMC are only available through the local or serial
RACADM interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
109