Reference Guide
cfgNicVLanId (Read or Write)
Description Species the VLAN ID for the network VLAN conguration (in
CMC for iDRAC Enterprise on server modules). This property is
only valid if cfgNicVLanEnable is set to 1 (enabled).
Legal Values 1 – 4000 and 4021 – 4094
Default 1
Example
racadm config -g cfgLanNetworking -o
cfgNicVlanID
1
cfgDNSDomainNameFromDHCP (Read/Write)
Description Species that the DNS domain name should be assigned from
the network DHCP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgIPv6Enable and cfgIPv6AutoCong are set to 1
(true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1
(true):
• cfgNicIPv4Enable
• cfgNicUseDhcp
• cfgIPv6Enable
• cfgIPv6AutoConfig
• cfgDNSDomainNameFromDHCP
• cfgDNSDomainName (Read/Write)
The network administrator must make sure that these DHCP servers are congured to provide the same DNS domain name to the
CMC, otherwise the domain name becomes unpredictable.
cfgDNSDomainName (Read/Write)
Description
This is the DNS domain name. This parameter is valid only if
cfgDNSDomainNameFromDHCP is set to 0 (FALSE).
Legal Values A string of up to 254 ASCII characters. At least one of the
characters must be alphabetic. Characters are restricted to
alphanumeric, '-', and '.'.
NOTE: Microsoft Active Directory supports only Fully
Qualied Domain Names (FQDN) of 64 bytes or fewer.
Default <blank>
107