Reference Guide

racdump
Description This subcommand displays the comprehensive chassis status
and configuration state information, and historic event logs.
Used for post-deployment configuration verification and
during debugging sessions.
To use this subcommand for CMC, you must have the
Administrator privilege.
Synopsis
racadm racdump
Input Racdump includes the following subsystems and aggregates
the following RACADM commands:
● General System/RAC information - getsysinfo
● Session information - getssinfo
● Sensor information - getsensorinfo
● Switches information (IO Module) - getioinfo
● Mezzanine card information (Daughter card) -
getdcinfo
● All modules information - getmodinfo
●
Power budget information - getpbinfo
● KVM information - getkvminfo
● NIC information (CMC module) - getniccfg
● Redundancy information - getredundancymode
● Trace log information - gettracelog
● RAC event log - getraclog
● System event log - getsel
Output
The following information is displayed when the
racdumpsubcommand is processed:
● General system/RAC information
● Coredump
● Session information
● Process information
● Firmware build information
Example
racadm racdump
===============================================================================
General System/RAC Information
===============================================================================
CMC Information:
CMC Date/Time = Wed, 28 Nov 2007 11:55:49 PM
CMC Version = X08
Last Firmware Update = Wed Nov 21 21:37:56 2007
Hardware Version = 2
Current IP Address = 192.168.155.10
Current IP Gateway = 192.168.155.1
Current IP Netmask = 255.255.255.128
DHCP Enabled = 1
MAC Address = 00:55:AB:39:10:0F
Current DNS Server 1 = 0.0.0.0
Current DNS Server 2 = 0.0.0.0
DNS Servers from DHCP = 0
Register DNS CMC Name = 0
DNS CMC Name = cmc-servicetag
72
RACADM Subcommand Details