Reference Guide

● -z — Displays timezone. This option is specific to CMC only.
● -n — Displays NTP peer information. This option is specific to CMC only.
NOTE: If no options are provided, the getractime subcommand displays the time in a common
readable format.
Output The current iDRAC time is displayed.
Example
● racadm getractime
Thu Dec 8 20:15:26 2005
● racadm getractime -d
20051208201542.000000
getredundancymode
Description
Displays the redundancy status (Redundant or Non-
Redundant) of the CMC.
To use this subcommand, you must have CMC Login User
privilege.
Synopsis
racadm getredundancymode
Example
racadm getredundancymode
Redundant
getsel
Description
Displays all sensor event log entries in the DRAC.
Synopsis
● racadm getsel -i [-A]
● racadm getsel [-s <start>] [-c <count>] [-A] [-o] [-E] [-R] [--more]
If no arguments are specified, the entire log is displayed.
Input
● -A — Specifies output with no display headers or labels.
● -c — Provides the number of records to be displayed.
● -o — Displays each entry in the SEL in a single line.
● -s — Specifies the starting record used for the display.
● -E — Displays RAW SEL data with the other data for each entry.
● -R — Displays only RAW SEL data for each entry.
● -i — Displays the number of entries in the SEL.
● --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command.)
NOTE: The -A, -E, -o, and -R options are deprecated.
RACADM Subcommand Details 57