Reference Guide

Dynamic PSU Engagement Enabled =
No
[Power Budgeting]
System Input Max Power Capacity
= 0 W
Input Redundancy Reserve
= 0 W
Input Power Allocated to Servers
= 0 W
Input Power Allocated to Chassis
Infrastructure = 51W
Total Input Power Available for
Allocation = 0 W
Standby Input Power Capacity
= 0 W
getraclog
Description
The getraclog command displays RAC log entries.
Synopsis
racadm getraclog [-s <start>] [-c <count>]
Input
NOTE: If no options are provided, the entire log is displayed.
● -c — Specifies the number of records to display.
● -s — Specifies the starting record used for the display.
● --more — Displays one screen at a time and prompts the user to continue.
Output
The default output display shows the record number, message ID, category, agent ID, severity, time stamp,
message arg, and message. The timestamp begins at midnight, January 1, and increases until the system
restarts. After the system restarts, the system’s timestamp is used.
SeqNumber = 4
Message ID = CMC8550
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 1982-03-21 05:33:35
Message Arg 1 = Healthy
Message = Chassis health is Healthy
Example
● Displays all the logs.
racadm getraclog
● Displays 3 records from record number 5:
racadm getraclog -s 5 -c 3
getractime
Description
Displays the current iDRAC time.
Synopsis
● racadm getractime [-d]
● racadm getractime [-d][-z]
● racadm getractime [-n]
Input
● -d — Displays the time in the format, yyyymmddhhmmss.mmmmmms.
56 RACADM Subcommand Details