Reference Guide

The following example is for a system with multi-slot servers.
racadm getdcinfo
Group A I/O Type : Gigabit Ethernet
Group B I/O Type : PCIe
Group C I/O Type : PCIe
<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-1 Present PCIe OK PCIe OK
server-2 Not Present None N/A None N/A
server-3 Present PCIe OK None N/A
server-4 Not Present None N/A None N/A
getdcinfo -n
<
Server#>
<Presence> <DC1 Model Name> <DC2 Model Name>
server-1 Present None None
server-2 Not Present None None
server-3 Not Present None None
server-4 Present None Broadcom M5708t
getflexaddr
Description
Enabled or disabled status is displayed for the entire chassis
and fabric ID decoder. Use the command with -i option to
display the MACs/WWN on a per-slot-basis
The decoder values in the Type column indicate the protocols
of the network cards:
40 RACADM Subcommand Details