Reference Guide

● Configure using subcategory and severity as parameters. For example, all Information
events under the licensing subcategory in the audit category are assigned poweroff as
action and all notifications are disabled:
racadm eventfilters set -c cmc.alert.audit.lic.info -n none
fanoffset
Description
Configures the internal fans to run at a higher speed than the normal speed.
To use this subcommand, you must have the Chassis Configuration Administrator privilege.
Synopsis
racadm fanoffset [-s <off|low|medium|high>
Valid category values are:
● off
● low
● medium
● high
Input s — Sets the fan speed.
Example
● Disable the fanoffset feature.
racadm fanoffset -s off
● Increases fan speed by 20% of fan’s maximum speed. Minimum speed for fan is 35% of the
maximum.
racadm fanoffset -s low
● Increases fan speed by 50% of fan’s maximum speed. Minimum speed for fan is 65% of the
maximum.
racadm fanoffset -s medium
● Sets fans to run at 100% of fan’s maximum speed.
racadm fanoffset -s high
feature
Description
Displays all active chassis features. The information displayed includes feature name, date activated, and
the serial number of the SD card used to activate the feature.
Dell Feature Cards may contain more than one feature.
NOTE: To use this subcommand to deactivate FlexAddress or ExtendedStorage, you must have the
Chassis Configuration Administrator privilege. A user with login privileges can view status only.
NOTE: To deactivate FlexAddress features, the chassis must be turned off.
Synopsis
● racadm feature -s
● racadm feature -d -c <featurename>
● racadm feature -r -c ExtendedStorage
Input
● -s — Displays the status of active features.
● -d — Deactivates the feature specified in -c option.
32 RACADM Subcommand Details