Reference Guide

clrsel
Table 11. Clrsel
Description Deletes all existing records from the System Event Log (SEL).
To use this subcommand, you must have the Clear Logs privilege.
Synopsis
racadm clrsel
cmcchangeover
Table 12. Cmcchangeover
Description Changes the state of the CMC from active to standby, or vice
versa, in a redundant CMC configuration. This subcommand is
useful for remote debugging or testing purposes.
To use this subcommand, you must have the Administrator
privilege.
NOTE: This command is valid only in redundant
CMC environments. For more information, see the
"Understanding the Redundant CMC Environment" section
of the Dell Chassis System User Guide.
Synopsis
racadm cmcchangeover
Input None
Output
CMC failover initiated successfully.
Example
racadm cmcchangeover
config
Table 13. Config
Description Allows you to set CMC configuration parameters individually or to batch them as part of a configuration
file. If the data is different, that CMC object is written with the new value.
Synopsis
racadm config [-c|-p] -f <filename>
racadm config -g <groupName> -o <objectName> [-i
<index>] <Value>
NOTE: The configuration file retrieved using remote racadm are not interoperable. For the config -f
<file name> command, use the configuration file retrieved from the same interface.
Input
NOTE: The -f and -p options are not supported for the serial/Telnet/SSH console.
● -f — The -f <filename> option causes config to read the contents of the file specified by <filename>
and configure CMC.
RACADM Subcommand Details 27