Reference Guide

Table 6. chassislog (continued)
timestamp>]
[-e <end timestamp>]
Input
● -i — Displays the number of records present in the active log. You cannot use this option
with any other option.
● -c — The log type to filter the records. Provide multiple categories using a "," as the
delimiter. The value is case-insensitive. Valid Category values:
○ All
○ System
○ Storage
○ Updates
○ Audit
○ Config
● -q - The sequence number from which the records must be displayed.
● -n - Specifies the n Number of records to be displayed.
● -r - Displays events that have occurred after this time. The time format is yyyy-mm-dd
HH:MM:SS. The time stamp must be provided within double quotes.
● -e - Displays events that have occurred before this time. The time format is yyyy-mm-dd
HH:MM:SS. The time stamp must be provided within double quotes.
● -f <filename> - Specifies the file location and name where the chassis log is exported.
● -a <name> - Specifies the FTP Server IP address or FQDN, user name, and password.
● -d <path> - Specifies the path to the file on the FTP server.
● -l <location> - Specifies the location of the network share or area on file system where
chassis log is exported. Two types of network shares are supported:
— SMB mounted path: //<ipaddress or domain name>/<share_name>/<path_to_image>
— NFS mounted path: <ipaddress>:/<path_to_image>.
● -u <user> — Specifies the user name for accessing the FTP Server, or Domain and User
Name for accessing network share location.
● -p <password> — Specifies the password for accessing the FTP Server or Share location.
● -s — Filters records based on severity. Provide multiple severities using a comma (,) as the
delimiter. The values are not case-sensitive. The valid severity values are:
○ 1. Warning
○ 2. Critical
○ 3. Info
● -b — The subcategory used to filter the records. Provide multiple subcategories using a
comma (,) as the delimiter. The values are not case-sensitive. The valid subcategories are:
○ CPUA: Proc Absent
○ MEM: Memory
○ UEFI: UEFI Event
○ FC: Fiber Channel
○ ENC: Storage Enclosure
○ SYS: System Info
○ LNK: Link Status
○ BAT: Battery Event
○ RSI: Remote Service
○ OSE: OS Event
○ VRM: Virtual Console
○ PSU: Power Supply
○ Log: Log event
○ RDU: Redundancy
○ FCD: Feature Card
○ CMC: Chassis Management Controller
○ CTL: Storage Controller
○ CPU: Processor
22
RACADM Subcommand Details