Reference Guide

Table Of Contents

Example

racadm getconfig -g cfgStandardSchema -i 1

NOTE: -i <number> is for the index.

# cfgSSADRoleGroupIndex=1

cfgSSADRoleGroupName=

cfgSSADRoleGroupDomain=

cfgSSADRoleGroupPrivilege=

$ config -g cfgStandardSchema -i 1 -o cfgSSADRoleGroupName Charlie

Object value modified successfully

The following table displays the bit masks for Role Group privileges:

Role Group Privilege

Bit Mask

Configure iDRAC 0x00000002

Configure Users 0x00000004

Clear Logs 0x00000008

Execute Server Control Commands 0x00000010

Access Virtual Console 0x00000020

Access Virtual Media 0x00000040

Test Alerts 0x00000080

Execute Debug Commands 0x00000100

cfgChassisPower

This group is applicable only to CMC and contains parameters to display or configure power for the chassis.

Use this object with the config or getconfig subcommands.

To use this object property, you must have the Chassis Configuration Administrator privilege.

The following sections provide information about the objects in the cfgChassisPower group.

NOTE:

While configuring chassis power from a file, update the value for one chassis power cap

property and remove the values for the other chassis power cap properties or, update the last

percentage value as it is applicable to all chassis power cap properties. The chassis power cap properties

are: cfgChassisPowerCap, cfgChassisPowerCapF, cfgChassisPowerCapBTU, cfgChassisPowerCapFBTU,

cfgChassisPowerCapPercent, and cfgChassisPowerCapFPercent.

cfgChassisInPower (Read Only)

Description

Indicates the cumulative input power consumption data (in Watt and BTU/hr) captured

from all healthy and functional PSUs in the chassis.

CMC Property Database Group and Object Descriptions 155