Reference Guide

Default 5
cfgRacTuneIpBlkFailWindow (Read/Write)
Description Defines the time span in seconds that the failed attempts are
counted. When failure attempts age beyond this limit, they are
dropped from the count.
Legal Values
2–65535
Default 60
cfgRacTuneIpBlkPenaltyTime (Read/Write)
Description
Defines the time span in seconds that session requests from
an IP address with excessive failures are rejected.
Legal Values
2–65535
Default 300
cfgRacTuneSshPort (Read/Write)
Description
Specifies the port number used for the SSH interface.
Legal Values
10–65535
Default 22
cfgRacTuneTelnetPort (Read/Write)
Description
Specifies the port number used for iDRAC or CMC Telnet
interface.
NOTE: For CMC, the following port numbers are reserved
and cannot be used: 21, 68, 69, 111, 123, 161, 546, 801,
4096, 5988, 5989, 6900, 9000, and 60106.
Legal Values
● For iDRAC: 1 – 65535
● For CMC: 10 – 65535
Default 23
cfgRacTuneDaylightOffset (Read Only)
Description
Specifies the daylight savings offset (in minutes) to use for the RAC Time. This value is 0 if the time
zone is not a Daylight Saving time zone.
Legal Values 0 – 60
Default 0
CMC Property Database Group and Object Descriptions 137