Reference Guide

Default 0
cfgRhostsSyslogPowerLoggingInterval
Description Specifies the power consumption collection/logging interval.
Legal Values 1–1440 (minutes)
Default 5
Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
cfgRhostsSyslogServer1=
cfgRhostsSyslogServer2=
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5
cfgUserAdmin
This group provides configuration information about the users who are allowed to access CMC through the available remote
interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
NOTE:
In the current CMC firmware version, the objects cfgUserAdminEnable and cfgUserAdminPrivilege are
interrelated; changing the value of one property causes the value of the other property to change. For example, if a
user does not have login privilege, the user is disabled by default. When you enable the user by changing the value of
UserAdminEnable to 1, the right most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you
change the right-most digit of the UserAdminPrivilege to 0, the value of UserAdminEnable becomes 0.
Use this object with the config or getconfig subcommands. You must supply an index group number to use these
commands as follows: -i <index group>
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE:
You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a configurable
object, use the -o option.
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Description
The unique index of a user.
The index number is used to specify a unique group name.
Only valid for indexed groups.
CMC Property Database Group and Object Descriptions 125