Reference Guide

Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a configurable
object, use the -o option.
The following sections provide information about the objects in the cfgLanNetworking group.
cfgNicIPv4Enable (Read or Write)
Description Enables or disables the IPv4 stack.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default 0
cfgNicVLanId (Read or Write)
Description
Specifies the VLAN ID for the network VLAN configuration (in
CMC for iDRAC Enterprise on server modules). This property
is only valid if cfgNicVLanEnable is set to 1 (enabled).
Legal Values 1 – 4000 and 4021 – 4094
Default 1
Example
racadm config -g cfgLanNetworking -o
cfgNicVlanID
1
cfgDNSDomainNameFromDHCP (Read/Write)
Description
Specifies that the DNS domain name should be assigned from
the network DHCP server.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default 0
This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgIPv6Enable and cfgIPv6AutoConfig are set to 1
(true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1
(true):
● cfgNicIPv4Enable
● cfgNicUseDhcp
● cfgIPv6Enable
● cfgIPv6AutoConfig
● cfgDNSDomainNameFromDHCP
● cfgDNSDomainName (Read/Write)
The network administrator must make sure that these DHCP servers are configured to provide the same DNS domain name to
the CMC, otherwise the domain name becomes unpredictable.
CMC Property Database Group and Object Descriptions
117