Reference Guide

Example
Commands for the cfgIpmiPet group:
● Enable the alert
racadm config -g cfgIpmiPet -o cfgIpmiPetAlertEnable -i 1
● Set the destination e-mail IP address
racadm config -g cfgIpmiPet -o cfgIpmiPetAlertDestIpAddr -i 1
192.168.0.110
● View the current test trap settings
racadm getconfig -g cfgIpmiPet -i <index>
where <index> is a number from 1 to 4.
traceroute
Description
Traces the network path of routers that packets take as they
are forwarded from your system to a destination IPv4 address.
To use this subcommand, you must have the Administrator
privilege.
Synopsis
racadm traceroute <IPv4 address>
racadm traceroute 192.168.0.1
Input
racadm traceroute 192.168.0.1
Output
traceroute to 192.168.0.1 (192.168.0.1),
30 hops
max,
40 byte packets
1 192.168.0.1 (192.168.0.1) 0.801 ms
0.246 ms 0.253 ms
traceroute6
Description
Traces the network path of routers that packets take as they
are forwarded from your system to a destination IPv6 address.
To use this subcommand, you must have the Administrator
privilege.
RACADM Subcommand Details 113