Reference Guide

testemail
Description Sends a test e-mail to a specified destination. Prior to executing the test e-mail command,
make sure that the SMTP server is configured and the specified index in the RACADM
cfgEmailAlert group is enabled and configured properly.
Synopsis
racadm testemail -i <index>
Input -i — Specifies the index of the e-mail alert to test.
Output
Success: Test e-mail sent successfully
Failure: Unable to send test e-mail
Example Commands for the cfgEmailAlert group:
● Enable the alert —
racadm config -g cfgEmailAlert -o cfgEmailAlertEnable -i 1
● Set the destination e-mail address —
racadm config -g cfgEmailAlert -o cfgEmailAlertAddress -i 1
[e-mail]
● Set the custom message that is sent to the destination e-mail address —
racadm config -g cfgEmailAlert -o cfgEmailAlertCustomMsg -i 1
"This is a test!"
● Make sure that the SMTP IP address is configured properly —
racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr
192.168.0.152
● View the current e-mail alert settings —
racadm getconfig -g cfgEmailAlert -i <index>
where <index> is a number from 1 to 4.
testfeature
The following tables describe the testfeature subcommand options.
Option
Description
-f <feature> Specifies the feature name. testfeature supports the
following features:
● ad — Tests Active Directory configuration using simple
authentication (user name and password).
● adkrb — Tests Active Directory configuration using the
Kerberos authentication.
● ldap — Tests LDAP configuration and operation (requires
user name and password).
110 RACADM Subcommand Details