Reference Guide

-g option cannot be used with the -s option, and the -f option
can only be used with the -g option.
The sslcsrgen -s subcommand returns one of the following
status codes:
● CSR was generated successfully.
● CSR does not exist.
Example
racadm sslcsrgen -s
or
racadm sslcsrgen -g -f c:\csr\csrtest.txt
NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM cfgRacSecurity group. For
example: racadm config -g cfgRacSecurity -o cfgRacSecCsrCommonName MyCompany
NOTE: In telnet/ssh console, you can only generate and not download the CSR file.
NOTE: The duration for generating a CSR key depends on the length specified for the key.
sslresetcfg
Description
Restores the web-server certificate to factory default and
restarts web-server. The certificate takes effect 30 seconds
after the command is entered.
To use this subcommand, you must have the Chassis
Configuration Administrator privilege for CMC.
Synopsis
racadm sslresetcfg
Example
$ racadm sslresetcfg
Certificate generated successfully and
webserver restarted.
set tempprobes
Description
Sets the minimum and maximum warning threshold of temperature probe in the enclosure
Synopsis
racadm raid set tempprobes:TempSensor.Embedded.0:Enclosure.External.1
0:RAID.ChassisSlot.6-1 –p MinimumWarningThreshold <value>
racadm raid set tempprobes:TempSensor.Embedded.0:Enclosure.External.1
0:RAID.ChassisSlot.6-1 –p MaximumWarningThreshold <value>
Input -p— The network password of the share.
Example
RACADM Subcommand Details 109