Reference Guide

To use this subcommand, you must have the Administrator privilege.
NOTE:
● The OMSA server agent must be present and running on the server to use the
Display Hostname feature. If the agent is not running, the setting is ignored. For
more information, see the Dell OpenManage Server Administrator User's Guide at
support.dell.com/manuals.
● The special characters \ (backslash), & (ampersand), ` (backward quotation mark),
and " (double quotation mark) are not supported for this subcommand.
Synopsis
racadm setslotname [-i <slotNum> <slotname> | -h 0|1|2]
racadm setslotname -h <enabled>
Input
● <slotNum> — Specify the slot number in the chassis. Valid values: 1 to 4.
● <slotname> — The new name to be assigned to the slot.
● <enabled> — Sets whether the server's host name is used for display purposes. Valid
values: 0, 1 or 2.
Example
● Set the name of slot 3 as server3:
racadm setslotname -i 3 server3
● Enable system to display host names (1= Hostname):
racadm setslotname -h 1
setsysinfo
Description
Sets the name or location of the chassis.
To use this subcommand, you must have the Administrator
privilege.
NOTE: The special characters \ (backslash), &
(ampersand), ` (back quote), and " (double quote) are not
supported for this subcommand.
Synopsis
racadm setsysinfo [-c chassisname|
chassislocation]
<string>
Input
● <string> — Indicates a maximum of 64 non-extended
ASCII chassis name or location.
● -c — Sets the chassis name or location.
Example
racadm setsysinfo -c chassisname "Dell
Rack System"
The chassis name was set successfully.
104 RACADM Subcommand Details