Users Guide

Configure Local Users Using RACADM
NOTE: You must be logged in as a root user to execute RACADM commands on a remote Linux system.
You can configure up to 16 users in the CMC property database. Before you manually enable a CMC user, verify if any current
users exist.
If you are configuring a new CMC or if you have used the racadm racresetcfg command, the only current user is root with
the password calvin. The racresetcfg subcommand resets all configuration parameters to the default values. Any earlier
changes are lost.
NOTE: Users can be enabled and disabled over time, and disabling a user does not delete the user from the database.
To verify if a user exists, open a Telnet/SSH text console to the CMC, log in, and then type the following command once for
each index of 1–16:
racadm getconfig -g cfgUserAdmin -i <index>
NOTE: You can also type racadm getconfig -f <myfile.cfg> and view or edit the myfile.cfg file, which
includes all the CMC configuration parameters.
Several parameters and object IDs are displayed with their current values. Two objects of importance are:
# cfgUserAdminIndex=XX
cfgUserAdminUserName=
If the cfgUserAdminUserName object has no value, that index number, which is indicated by the cfgUserAdminIndex
object, is available for use. If a name is displayed after the "=", that index is taken by that user name.
When you manually enable or disable a user with the racadm config subcommand, you must specify the index with the -i
option.
The "#" character in the command objects indicates that it is a read-only object. Also, if you use the racadm config -f
racadm.cfg command to specify any number of groups/objects to write, the index cannot be specified. A new user is added
to the first available index. This behavior allows more flexibility in configuring a second CMC with the same settings as the main
CMC.
Adding CMC User Using RACADM
To add a new user to the CMC configuration:
1. Set the user name.
2. Set the password.
3. Set the user privileges. For information about user privileges, see Types of Users.
4. Enable the user.
Example:
The following example describes how to add a new user named "John" with a "123456" password and login privileges to the
CMC.
racadm config -g cfgUserAdmin -o cfgUserAdminUserName
-i 2
john
racadm config -g cfgUserAdmin -o cfgUserAdminPassword
-i 2
123456
racadm config -g cfgUserAdmin -i 2 -o
cfgUserAdminPrivilege
0x00000001
racadm config -g cfgUserAdmin -i 2 -o
cfgUserAdminEnable 1
120
Configuring User Accounts and Privileges