Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 2.20 for Dell PowerEdge VRTX
111112113114115116117118119120
Table Of Contents
where <email name> is the name of the person or group receiving the email alert, and <index> is the index value
specified in step 4 and step 5. The email name can contain up to 32 alphanumeric characters, dashes, underscores, and
periods. Spaces are not valid.
7. Set up the SMTP host:
racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain
where host.domain is the FQDN.
You can configure up to four destination email addresses to receive email alerts. To add more email addresses, perform tasks
in step 2 through 6.
NOTE: The commands in steps 2–6 overwrite any existing settings configured for the index that you specify
(1–4). To determine whether an index has previously configured values, type racadm getconfig -g
cfgEmailAlert — I <index>. If the index is configured, values appear for the cfgEmailAlertAddress and
cfgEmailAlertEmailName objects.
For more information, see the Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference
Guide available at dell.com/support/manuals.
Configuring CMC To Send Alerts 115