Reference Guide

Table Of Contents

set tempprobes

Description Sets the minimum and maximum warning threshold of temperature probe in the enclosure

Synopsis

racadm raid set tempprobes:TempSensor.Embedded.0:Enclosure.External.1

0:RAID.ChassisSlot.6-1 –p MinimumWarningThreshold <value>

racadm raid set tempprobes:TempSensor.Embedded.0:Enclosure.External.1

0:RAID.ChassisSlot.6-1 –p MaximumWarningThreshold <value>

Input -p— The network password of the share.

Example

testemail

Description Sends a test e-mail to a specified destination. Prior to executing the test e-mail command, make

sure that the SMTP server is configured and the specified index in the RACADM cfgEmailAlert

group is enabled and configured properly.

Synopsis

racadm testemail -i <index>

Input -i — Specifies the index of the e-mail alert to test.

Output

Success: Test e-mail sent successfully

Failure: Unable to send test e-mail

Example Commands for the cfgEmailAlert group:

• Enable the alert —

racadm config -g cfgEmailAlert -o cfgEmailAlertEnable -i 1

• Set the destination e-mail address —

racadm config -g cfgEmailAlert -o cfgEmailAlertAddress -i 1

user1@mycompany.com

• Set the custom message that is sent to the destination e-mail address —

racadm config -g cfgEmailAlert -o cfgEmailAlertCustomMsg -i 1

"This is a test!"

• Make sure that the SMTP IP address is configured properly —

racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr

192.168.0.152

• View the current e-mail alert settings —

racadm getconfig -g cfgEmailAlert -i <index>

where <index> is a number from 1 to 4.

testfeature

The following tables describe the testfeature subcommand options.

Option

Description

-f <feature> Specifies the feature name. testfeature supports the following

features:

• ad — Tests Active Directory configuration using simple

authentication (user name and password).

• adkrb — Tests Active Directory configuration using the

Kerberos authentication.