Reference Guide

NOTE: The special characters \ (backslash), &
(ampersand), ` (back quote), and " (double quote) are
not supported for this subcommand.
Synopsis
racadm setsysinfo [-c chassisname|
chassislocation]
<string>
Input
• <string> — Indicates a maximum of 64 non-extended ASCII
chassis name or location.
• -c — Sets the chassis name or location.
Example
racadm setsysinfo -c chassisname "Dell Rack
System"
The chassis name was set successfully.
SSH or Telnet RACADM
racadm getconfig -g <groupname> [-o <objectname>]
[-i <indexnumber>]
racadm <subcommand>
Example
racadm getconfig -g idracinfo
racadm getsysinfo
sshpkauth
Description
Enables you to upload and manage up to six (6) different SSH public keys. You can
upload a key file or key text, view keys, or delete keys.
racadm sshpkauth -i svcacct -k <key index> -p
<privilege> -t <PK key text>
racadm sshpkauth -i svcacct -k <key index> -p
<privilege> -f <PK key file>
racadm sshpkauth -v -i svcacct -k <key index>
racadm sshpkauth -d -i svcacct -k <key index>
NOTE:
For DSA keys greater than 2048, use the following racadm command. CMC
accepts RSA keys up to key strength 4096, but the recommended key strength is
1024.
racadm -r 192.168.8.14 -u root -p calvin sshpkauth -i
svcacct -k 1 -p 0xfff -f dsa_2048.pub
Synopsis
racadm sshpkauth
Input
• -i Index for the user. <svcacct> is the Index for CMC.
• -k index from 1-6 (or all for -v / -d options) to assign the PK key being
uploaded.
• -p privilege level to give to user for this PK key.
• -t Key text for the PK key.
• -r Specifies the controller’s remote IP address.
• -u Specifies the user name.
94