Reference Guide

Power Status = ON
System ID = 1487
Examples
racadm getsysinfo -d
racadm getsysinfo -c
racadm getsysinfo -A
racadm getsysinfo -4
racadm getsysinfo -6
gettracelog
Description Lists all the trace log entries in CMC.
Synopsis
• racadm gettracelog -i [-A]
• racadm gettracelog [-s <start>] [-c <count>] [--more] [-A] [-o]
Input
• -i - Displays the number of entries in iDRAC trace log.
• --more - Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command).
• -o - Displays each entry in a single line.
• -c - Specifies the number of records to display.
• -s - Specifies the starting record to display.
• -A - Does not display headers or labels.
NOTE: The -A and -o options are deprecated.
Output The default output display shows the record number, timestamp, source, and description. The timestamp
begins at midnight, January 1 and increases until the system boots. After the system boots, the system’s
timestamp is used.
Example
Record: 1
Date/Time: Dec 8 08:21:30
Source: ssnmgrd[175]
Description: root from 143.166.157.103: session timeout
sid 0be0aef4
getversion
Table 18. getversion
Description
Displays the current firmware version of various modules in the chassis, iDRAC version on the attached
servers, and whether the target device can be updated.
NOTE: To use this subcommand, you must have CMC Login User privilege.
Synopsis
• racadm getversion
• racadm getversion [-b | -c] [-m <module>]
• racadm getversion -l [-m <module>] [-f <filter>]
Input
NOTE: The -b, -c and -l options are not available for CMC modules.
56