Reference Guide

To use this subcommand, you must have the Chassis Configuration Administrator privilege.
Synopsis
racadm fanoffset [-s <off|low|medium|high>
Valid category values are:
• off
• low
• medium
• high
Input s — Sets the fan speed.
Example
• Disable the fanoffset feature.
racadm fanoffset -s off
• Increases fan speed by 20% of fan’s maximum speed. Minimum speed for fan is 35% of the
maximum.
racadm fanoffset -s low
• Increases fan speed by 50% of fan’s maximum speed. Minimum speed for fan is 65% of the
maximum.
racadm fanoffset -s medium
• Sets fans to run at 100% of fan’s maximum speed.
racadm fanoffset -s high
feature
Description
Displays all active chassis features. The information displayed includes feature name, date activated, and the
serial number of the SD card used to activate the feature.
Dell Feature Cards may contain more than one feature.
NOTE: To use this subcommand to deactivate FlexAddress or ExtendedStorage, you must have the
Chassis Configuration Administrator privilege. A user with login privileges can view status only.
NOTE: To deactivate FlexAddress features, the chassis must be turned off.
Synopsis
• racadm feature -s
• racadm feature -d -c <featurename>
• racadm feature -r -c ExtendedStorage
Input
• -s — Displays the status of active features.
• -d — Deactivates the feature specified in -c option.
NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating one of them
results in deactivation of the other feature also. However, ExtendedStorage is not affected by the
deactivation of FlexAddress or FlexAddresPlus.
• -r — Repair damaged/unformatted ExtendedStorage media.
NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.
CAUTION: Using the -r switch reformats the SD media in the active CMC cardslot. Any existing
ExtendedStorage data will be lost.
• -c — <featurename> must be one of the following:
• flexaddress (with -d)
• flexaddressplus (with -d) ExtendedStorage (with -d or -r)
30