Reference Guide

The -s and -d options cannot be used together in the same command.
• -6 — Enables IPv6 auto configuration (when used with -d.) Sets static IPv6 addresses
(when used with -s).
• -q — Displays or modifies the quick deploy parameters.
• -n<numofblades> — Specifies the number of reserved IP addresses for quick deploy. The
valid values are 2 and 4.
• -e — Uses the CMC DNS settings for quick deploy. The legal values are:
– 1 — Enable
– 0 — Disable
• --qd — Updates the quick deploy parameters to the servers. This option works only with
the -q option.
Output None
Example
• racadm deploy -m server-8 -s 192.168.0.20 255.255.255.0
192.168.0.1
The server was deployed successfully.
The deploy command generates an error when used on the extension slot of a multi-slot
server.
• racadm deploy -m server-9 192.168.0.11 255.255.255.0
192.168.0.1
ERROR: Server in slot 9 is an extension of the server in slot 1.
• rracadm deploy -m server-7 -u root -p calvin -s -6 ::/64 :: 10
Displayable Characters
Displayable characters include the following set:
abcdefghijklmnopqrstuvwxwz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/
eventfilters
Description
Gets, sets, and displays the list of event filter settings.
To use this subcommand with the get option, you must have the CMC Login User privilege.
Synopsis
racadm eventfilters <eventfilters command type>
racadm eventfilters get -c <alert descriptor>
racadm eventfilters set -c <alert descriptor>-n <notifications>
NOTE: The general format of an alert descriptor:
cmc.alert.category.[subcategory].[severity]
where, category is mandatory, but subcategory and severity are optional. A severity
cannot precede a subcategory.
Valid category values are:
• System
• Config
• Updates
• Storage
• Audit
28