Reference Guide

cfgCurrentIPv6Gateway
Description Displays the current IPv6 gateway.
Legal Values
Default
cfgCurrentIPv6DNSServersFromDHCP6
Description Indicates whether the DNS server addresses are assigned from
the DHCPv6 server.
Legal Values
Default
cfgCurrentIPv6DNSServer1
Description Displays the IPv6 address for DNS server 1.
Legal Values
Default
cfgCurrentIPv6DNSServer2
Description
Displays the IPv6 address for DNS server 2.
Legal Values None
Default None
Example
racadm getconfig -g cfgCurrentIPv6LanNetworking
# cfgCurrentIPv6Enabled=1
# cfgCurrentIPv6AutoConfigWasUsed=1
# cfgCurrentLinkLocalAddress=fe80::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address1=2009:123::e48f:9dd8:6f51:a669/64
# cfgCurrentIPv6Address2=fd88:1::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address3=fd88:2::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Gateway=fe80::21c:23ff:fe77:6215
# cfgCurrentIPv6DNSServersFromDHCP6=1
# cfgCurrentIPv6DNSServer1=2009:123::1
# cfgCurrentIPv6DNSServer2=::
cfgNetTuning
This group enables users to configure the advanced network interface parameters for the RAC NIC or CMC. When configured, the
updated settings may take up to a minute to become active.
The following sections provide information about the objects in the cfgNetTuning group.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modification of the properties in
this group can result in your RAC NIC become inoperable.
cfgNetTuningNicSpeed
Description
Specifies the speed for the CMC NIC. This property is used only
if cfgNetTuningNicAutoNeg is set to 0.
Legal Values 10, 100, or 1000
150