Reference Guide

cfgDvdSlot<num>Enable Read or Write
Description Enable the slots (1 to 4) to access the DVD:
• cfgDvdSlot1Enable
• cfgDvdSlot2Enable
• cfgDvdSlot3Enable
• cfgDvdSlot4Enable
Legal Values 0 disables the mapping and 1 enables the mapping.
Default None
cfgLcdInfo
This group is used to view the LCD locale, LCD orientation, and to check if the buttons to navigate through the LCD menu are
enabled.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The legal values when you run the getconfig -g cfgLcdInfo to view information about the following are:
• cfgLcdLocale=es
• cfgLcdOrientation=0
• cfgLcdButtonsEnable=1
cfgAlerting
This group is enables or disables SNMP event trap alerting and sets the event filter.
Use this object with the config or getconfig subcommands.
cfgAlertingEnable
Description
Enables or disables event traps on the CMC.
Legal Values
• 1 (true)
• 0 (false)
Default None
To use this object property, you must have the Chassis Configuration Administrator privilege.
cfgAlertingSourceEmailName
Description
Specifies the e-mail address used to send e-mail notifications when an event occurs.
Legal Values Valid e-mail address
Default None
144