Reference Guide

cfgChassisPowerCapFPercent (Read/Write)
Description Indicates the power consumption limit as a percentage. The
percentage is computed mathematically as the minimum power
+ (percent * (maximum power - minimum power)). Use
cfgChassisPowerCapFPercent when power consumption is to
be changed regardless of whether server throttling is required.
Legal Values 16 - 100
NOTE: If the specified percent is lower than the
minimum value, the CMC will set the value to the
minimum value.
Default 100
cfgChassisRedundancyPolicy (Read/Write)
Description Sets the redundancy policy of the chassis.
Legal Values
• 0 (no redundancy)
• 1 (AC redundancy)
• 2 (power supply redundancy)
Default 0 (no redundancy)
cfgChassisDynamicPSUEngagementEnable (Read/Write)
Description
Enables or disables dynamic engagement.
Legal Values
• 0 (disabled)
• 1 (enabled)
Default 0 (disabled)
cfgChassisInMaxPowerCapacity (Read Only)
Description
Indicates the total chassis power budget (in watts) available for chassis operation.
Legal Values None
Default None
cfgChassisInRedundancyReserve (Read Only)
Description
Indicates the amount of redundant power (in Watt) in reserve that can be utilized in the event
of an AC grid or PSU failure. This value is 0 if the Redundancy Policy is set to 0 (no
redundancy).
Legal Values 0 (disabled)
1 (enabled)
Default None
140