Reference Guide

Table Of Contents
cfgRhostsSyslogEnable (Read/Write)
Description Enables or disables remote syslog to allow the RAC and SEL
logs to be written to up to three remote syslog servers.
Legal Values
1 (TRUE)
0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read/Write)
Description Remote syslog port number to use for writing the RAC and SEL
logs to a remote syslog server.
This setting takes effect only if the cfgRhostsSyslogEnable
parameter is set to 1 (enabled).
Legal Values 10–65535
NOTE: The following port numbers are reserved and
cannot be used: 21, 68, 69, 123, 161, 546, 801, 4096,
5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 (Read/Write)
Description
Specifies the first of three possible remote syslog servers to
store the RAC and SEL logs.This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
cfgRhostsSyslogServer2 (Read/Write)
Description
Specifies the second of three possible remote syslog servers to
store the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
cfgRhostsSyslogServer3 (Read/Write)
Description
Specifies the third of three possible remote syslog servers to
store the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
cfgRhostsSyslogPowerLoggingEnabled
Description
Enables or disables power consumption logging to remote syslog
servers.
109