Reference Guide

Table Of Contents
cfgDNSServer2 (Read/Write)
Description Retrieves the IPv4 address for DNS server 2. This parameter is
only valid if cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgNicEnable (Read/Write)
Description Enables or disables CMC network interface controller. If the NIC
is disabled, the remote network interfaces to CMC are no longer
accessible and CMC are only available through the local or serial
RACADM interface.
Legal Values
1 (TRUE)
0 (FALSE)
Default 1
cfgNicIpAddress (Read/Write)
Description
Specifies the static IPv4 address to be assigned to the RAC or
CMC.
NOTE: This parameter is only configurable if the
cfgNicUseDhcp parameter is set to 0 (FALSE.)
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default
192.168.0.120
cfgNicNetmask (Read/Write)
Description
The subnet mask used for CMC IP address.
This property is only valid if cfgNicUseDhcp is set to 0 (FALSE).
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0
(FALSE).
Legal Values String representing a valid subnet mask. For example: 255.255.255.0.
Default 255.255.255.0
cfgNicGateway (Read/Write)
Description
CMC gateway IPv4 address.
The gateway IPv4 address used for static assignment of the RAC IP address. This property is
only valid if cfgNicUseDhcp is set to 0 (FALSE).
106