Users Guide

• Monitor — This mode enables you to monitor the chassis components but you cannot perform any rmware update through
iDRAC, OS, iDRAC RACADM proxy, or Lifecycle Controller.
• Manage and Monitor — This mode enables you to monitor the chassis components and update the CMC rmware using DUP
through iDRAC, OS, iDRAC RACADM, or Lifecycle Controller.
Conguring chassis management at server mode using
RACADM
To enable the Chassis Management at server using RACADM, use the following commands:
• To disable Chassis Management at Server mode, use:
racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 0
• To change Chassis Management at Server mode to monitor, use:
racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 1
• To change Chassis Management at server mode to manage and monitor, use:
racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 2
Installing and setting up CMC 35