Users Guide

Interpreting LED colors and blinking patterns
The LEDs on the chassis provide the following status of a component:
• A blinking amber LED on a module indicates a fault on that module.
• Blue, blinking LEDs are congurable by the user and used for identication. For more information about conguration, see
CMC_Stmp_Conguring LEDs to Identify Components on the Chassis.
Table 33. LED Color and Blinking Patterns
Component LED Color, Blinking Pattern Status
CMC Turned on
Firmware is being uploaded
Turned o
Blue, glowing steadily Active
Blue, blinking User-enabled module identier
Amber, glowing steadily Not used
Amber, blinking Fault
Server Turned on
Firmware is being uploaded
Turned o
Blue, glowing steadily Server is selected on the KVM
Blue, blinking User-enabled module identier
Amber, glowing steadily Not used
Amber, blinking Fault
Blue, dark No fault
IOM (Common) Green, glowing steadily Turned on
Green, blinking Firmware is being uploaded
Green, dark Turned o
Blue, glowing steadily Normal/stack master
Blue, blinking User-enabled module identier
Amber, glowing steadily Not used
Amber, blinking Fault
Blue, dark No fault/stack slave
IOM (Pass through) Green, glowing steadily Turned on
Green, blinking Not used
Green, dark Powered o
Blue, glowing steadily Normal
162 Troubleshooting and recovery